ABS-specific alternate-length brake line kit with PTFE inner tubing, aramid fiber braid and a clear outer jacket. Upper, lower and mid kits sold separately. Assembled in the USA.
✅ Built for Harley-Davidson motorcycles equipped with ABS, this alternate-length front brake line kit preserves anti-lock brake system function when replacing or re-routing hoses.
🛡️ Constructed with PTFE inner tubing, aramid fiber reinforcement and a premium braided shield inside a clear outer jacket to minimize expansion and resist scuffing without yellowing.
This kit includes a direct-fit lower assembly designed to be used with alternative-length upper lines; upper, lower, mid and adapter components are sold separately to ensure correct fitment.
Single-disc Dyna and Sportster machines typically require two kits (one upper and one lower). Softail models may use up to three kits depending on disc configuration, with specific adapter instructions for '11–'17 and '18+ models.
Touring models with dual-disc setups and trikes require mid- and upper-line combinations to complete the routing from the master cylinder to the ABS controller; mid-line and upper-line components are required for these applications.
Non-stock applications require measuring upper line length and banjo angle using the OE master cylinder line as a guide; follow the stock routing and measure from the soft line entry point at the crimp collar up to the master cylinder to determine replacement length.
Assembled in the USA. Installation notes and model-specific adapter guidance are provided to ensure safe, ABS-compliant operation.
English (English)
Español