ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind – 99-06 Touring, 00-06 Softail, 99-05 Dyna, 01-02 CVO

Designed to upgrade '99-'06 Twin Cam motors (except '06 Dyna Glide) to the newer roller-style cam chains and hydraulic adjusters for longer life. 🔧

Cam grinds listed are intended for use with stock lifters and require the installation of a '07-'17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters; these parts are sold separately.

A detailed list of required components is supplied with each set of cams to simplify ordering and installation. 📋

Performance should be similar to earlier bikes with the same cam grinds, delivering strong torque and horsepower through a 2600–6200+ rpm range.

These cams are designed for engines with roughly 9.8:1 to 10.2:1 compression ratios; installer must verify coil bind, valve-to-valve clearance and piston-to-valve clearance before use. ⚠️

Can be used with stock tappets when minimum valve travel of .620" is maintained; maximum power is achieved with proper tuning and clearance checks.

Made in the USA. 🇺🇸