⚡🔧 This programmable load equalizer lets you use LED flashers on bikes that require a resistive load. It provides a smooth, adjustable load so LED signals behave like traditional bulbs.
- Power is adjusted via a thin blue control wire.
- Hold the blue wire to +12 volts and the load increases in 50 steps up to approximately 10 watts.
- Hold the blue wire to ground and the load decreases down to 0 watts.
- The current setting is saved automatically when the control wire is disconnected and recalled on next power-up.
- The unit cycles through all power values in about 20 seconds; the built-in LED flashes up to 50 times to indicate changes and lights continuously at the two limits (0 W and ~10 W).
- Input voltage range: 7 - 18 V. Output power range: between 2 × 1 W and 2 × 15 W.
- Connections: inputs ~0.14 mm², outputs ~0.75 mm². Maximum ambient temperature: 80 °C.
- Dimensions: 56 mm × 37 mm × 17 mm.
Easy to install and intuitive to set, this compact module is ideal when replacing incandescent indicators with LEDs and you need a configurable load to ensure proper flash rate and reliability. 📏
English (English)
Español
