DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 7-pin, Black – 91-94 Touring, 91-95 Softail, 91-95, 98 Dyna, 91-94 FXR, 90-93 Sportster

The 2000-HDE PC-Programmable Digital Ignition Module is a plug-in upgrade to the electronic advance ignition found on late model Harleys. It is microcomputer controlled to provide extremely accurate management of the entire ignition process. 🔧💻

• Allows riders to tailor the advance curve and rev limiter to the specific needs of their engine; four built-in advance curves cover applications from stock to highly modified engines.
• Choose from four independent rev limiter settings from 6000 to 7500 rpm to set the exact protection level required.
• PC programmability lets you define wide-open and part-throttle curves, rev limits, dead-cranking revs, and rear cylinder offset.
• A separate tach output wire provides clean tach operation during rev limiting and when in single-fire mode.
• A diagnostic LED indicator on the back of the control module assists with troubleshooting and static timing.

Important: on any electronic advance ignition such as the Dyna 2000-HD1 or the stock Harley ignition, you must use carbon fiber-type suppression spark plug wires to reduce radio frequency interference. Use of copper wires may cause malfunction of the ignition due to severe electrical noise generated at the spark plugs. The original wire supplied by Harley-Davidson should be okay.

Not for fuel-injected models. HDE systems are not compatible with Dyna "S" systems; use HD1/HD2 systems only.

Made in the USA.