The 2000I PC Programmable Electronic Ignition Kit is a completely self-contained ignition module engineered to tuck neatly under the cam cover for a clean look on custom bikes. It offers reliable single-fire operation down to zero rpm for easier cranking and kicking and will operate in any combination of single-fire or dual-fire with single-plug or dual-plug heads.
- Ten advance curves covering a broad range of engine builds and riding styles.
- Engine over-rev protection, adjustable from 6000 to 7500 rpm.
- Adjustable timing retard for nitrous and turbo applications.
- VOES indicator for at-a-glance monitoring of the VOES switch.
- Built-in tach driver for shift lights, auto-shifters and other accessories.
- Easy static timing with a built-in timing indicator and intelligent over-current/short-circuit protection.
- Active dwell control and over-voltage protection against momentary spikes.
- Data recording: total engine hours, time at wide-open throttle, longest WOT duration, max rpm, seconds near rev limit and number of starts.
- PC programmability enables an eight-point, fully definable wide-open throttle curve and a fully definable part-throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs (0–5), rear cylinder offset, total of ±10° timing adjustment, programmable rev limiter, security lockout (PIN), and single- or dual-fire configuration.
- Pigtail connector lets the user connect the ignition to a PC to download recorded data or program power curves; the connector remains on the bike.
- Made in the USA. Not for fuel-injected models. Programming kit (CD, cables and instructions) required for programming and downloading data.
Programmable flexibility and robust protections make this ignition kit suitable for a wide range of custom and performance engine builds. 🔧🏍️
English (English)
Español
