shop by category

Home

Motorcycle exhaust homologation in Spain

What does it mean for an exhaust to be homologated?

A homologated (type-approved) exhaust or silencer has passed the noise tests (and, where applicable, the emissions tests) required to be used in the EU on a specific motorcycle model. Homologation is not universal: it is valid for the models and years listed on its certificate.

The E / e marking

Homologated silencers carry an engraved code. It can be a capital "E" inside a circle followed by a number, which corresponds to approval under the UN/ECE regulations (Regulation No. 92 for replacement motorcycle silencers). Or it can be a lower-case "e" inside a rectangle, which corresponds to approval under EU legislation. The number indicates the country that granted the approval (for example, E9 or e9 = Spain).

Keep the certificate or the documentation supplied with the exhaust. You are not required to carry it with you (the vehicle documents required by the Reglamento General de Vehículos are the registration document and the ITV card), but keep it with the motorcycle's papers: it may be asked for at the ITV. On the road, the proof is the marking engraved on the silencer itself.

Modifications and the ITV

According to the Spanish Vehicle Modifications Manual (Manual de Reformas de Vehículos, revision 7, correction 2, in force since 6 February 2026), replacing the silencer with one that is homologated for your motorcycle (in accordance with Directive 97/24/EC, chapter 9, or Regulation (EU) No 134/2014, Annex IX) is not considered a modification. By contrast, changing the characteristics of the system —its layout, total volume, silencers, catalytic converter or outlet section— is a modification (code 2.6) that would have to be legalised.

At the inspection, the ITV measures the noise with the motorcycle stationary and compares it with the value shown in the vehicle's documentation (or, failing that, on the manufacturer's plate, the approval sheet or the manufacturer's reference tables), with a margin of 4 dB(A). A homologated exhaust that is louder than permitted for your motorcycle, or one from which the baffle (dB killer) has been removed, may fail the ITV: exceeding the noise limit or removing exhaust components without authorisation is classified as a serious defect (defecto grave).

"Not homologated" or "track use"

An exhaust marked not homologated, competition only, off-road or track use is not authorised for use on public roads. Fitting it to a registered motorcycle can result in a serious defect at the ITV (unfavourable inspection) and a fine. American labels such as "49 State", "50 State" or "EPA/CARB" are not equivalent to a European homologation.

Before you buy

Check the product page and its documentation to see whether the exhaust is homologated for your motorcycle's model and year. If you have any doubt, write to us before placing your order and we will check it with you.

Official sources