MUC-OFF Ceramic Protection Kit — Ceramic protective kit

Protect and enhance your paint and components with an easy-to-apply ceramic coating that delivers long-lasting gloss, slickness and water repellence. ✨💧🛡️

Key benefits

• Quick and easy application
• Paint gloss enhancement and industry-leading slickness
• Dirt and grime repellence with water shedding properties
• Liquid repellence with a water contact angle of 100°–110°
• 9H scratch resistance and chemical resistance
• Durable — can last up to 2 years when instructions are followed
• Suitable for gloss and matt finishes (matt will appear richer and darker after curing)

What it protects

Designed for bicycles, e-bikes, motorcycles, cars, ATVs and more. Safe for paintwork, carbon fiber, metal components, wheels, vinyl and rigid plastic trim.

What is included in the kit

• 1 × 15ml ceramic coating
• 1 × 50ml surface preparation spray
• 1 × microfibre applicator pad
• 2 × luxury microfibre buffing cloths

How to use

Preparing the surface

1. Thoroughly wash your vehicle with a suitable cleaner and dry completely before starting.
2. Perform paint correction as required to remove defects; the coating will seal imperfections if left uncorrected.
3. Remove any residue by wiping painted surfaces with the surface prep spray on a microfibre cloth.

Ceramic coating application

1. Apply in a cool, dry, clean area with good lighting and ventilation. For non-factory finishes, test a small inconspicuous area first.
2. Shake the bottle thoroughly for 10 seconds to activate the formula.
3. Wear protective gloves during application.
4. Unscrew the child-resistant cap and apply the coating sparingly and evenly to the provided microfibre applicator pad.
5. Work in an overlapping crosshatch pattern, limiting application to roughly one panel or tube at a time.
6. If the applicator does not glide smoothly, add a small amount of coating to the pad.
7. Allow the wet coating to cure for 5 minutes. A rainbow-like appearance will develop; during this time ensure all areas are covered, then buff off with the microfibre cloth to a high gloss. Do not allow the wet coating to cure for longer than 5 minutes before buffing off.
8. After buffing, let the coating fully cure for 24 hours in a cool, dry place before exposure to water or the elements. Avoid washing for at least 48 hours for best adhesion.
9. For extended durability, a second layer can be applied after the first layer has fully cured. No re-prep required.
10. Use within 6 months once opened.
11. Go ride!

Maintenance and cleaning

1. Maintain the coating using recommended non-acidic cleaners to preserve hydrophobic properties.
2. Keep surfaces clean to retain water-beading performance.
3. If hydrophobic performance decreases, refresh with a top-up application every 6 months.